2.2kw Power Automatic Bloodletting Hoist Slaughter Machine
This equipment is a kind of mechanical lifting equipment which is widely used in slaughtering industry. Its orbit form is tube rail. Its elevation can be chosen between 1.2 and 2.4 meters according to the actual needs of the user. The use of the equipment greatly reduced the labor intensity of the workers and doubled the production efficiency.
Use, maintenance, maintenance and troubleshooting methods
1) the equipment shall be installed in accordance with the process plan and tested after installation. During test run, attention should be paid to whether the equipment has running noise and whether the chain is running in the right direction. If any abnormal sound is found, stop and check immediately, mainly to check whether there are foreign bodies in the transmission part and whether the installation position of the reducer and the transmission part conforms to the technical requirements.
2) the equipment shall be cleaned and maintained in a weekly cycle. Check chain tightness and lubricating parts for lubricating grease.
3) before using the equipment each time, the equipment should run without load for a period of time, and then be put into use after ensuring that the equipment is free from abnormal conditions.
Trial run:
Turn on the power switch and the return system is in the working state to check whether the operation of each mechanism is normal. After the no-load test there is no abnormal before the load test can be carried out.
Key points of safe operation
1) it is strictly prohibited to put hands and other things into the machine while it is working, so as to prevent injury to people or damage to the machine; 2) if abnormal work sounds appear in the machine, the machine should be stopped immediately to check to prevent the machine from causing serious damage and injury to the personnel; 3) the machine must be cleaned and maintained when stopping, and make sure that the power supply has been cut off and the warning card is hung; 4) turn off the power supply after the work is finished; 5) the operator shall have knowledge of the operation of machinery and electrical appliances and be in good health; 6) the operator should be familiar with the structure, performance, safety rules and instructions of the machine, etc. 7) the operator should be trained on-the-job and on duty with a license; 8) the operator should check the operation daily before each class of work; Users must establish the necessary rules and regulations and safety operating procedures.
Inspection, maintenance and maintenance:
the equipment is tested and operated before leaving the factory, but after leaving the factory, it may cause maladjustment or malfunction due to such factors as transportation, loading, unloading, etc., so it is necessary to carry out a comprehensive inspection of the whole machine, and after making sure that all parts are in good condition, It can only be installed and used; The chain is tensioned before the equipment runs to ensure that the chain is in a moderate tightening state. After installation and use, in addition to normal maintenance, regular maintenance, excessive wear parts should be replaced in time to ensure the normal operation of the machine.
Rpair
Repair, adjust or replace parts immediately if they do not meet the requirements. The following requirements should be achieved in maintenance:
1) the replacement should be the same as the raw material performance.
2) maintenance and repair are not allowed when the hanger return machine is in operation.
Audited Supplier 
){kind=link}