halal cow slaughter kill box of slaughter machine
This equipment is a newly developed modern peeling equipment of our company. It is mainly used for mechanical peeling of cattle or horses in automated assembly line operation. This equipment uses the hydraulic transmission system, changes the old mechanical transmission tedious and the hydraulic transmission cumbersome, in the structure design is more simple, reliable, and easy to maintain. In the process of use, there is no noise, the operation is stable and safe and convenient. It is an indispensable process equipment in the meat industry machinery.
Installtion and use
This machine adopts hydraulic transmission system, mainly consists of frame, oil tank, sliding car, cylinder, hydraulic motor, roller and so on. Each operation, just press the control button, press "on" when the cylinder action to drive the drum lift, then the pre-stripped cattle, horse leather clip on the drum, press the "down" cylinder action to drive the cylinder down, press the "left" when the oil motor action, Rollers roll down the hide, press "right" when the oil motor reverses, will pull off the skin loosened. Complete an action process.
Principle:
the oil motor drives the roller to rotate, and the cylinder controls the upper and lower motion of the pulley so as to pull the hide off the carcass to achieve the purpose of pulling the skin.
the point of operation safety
1. It is strictly prohibited to put hands and other things into the machine while working to prevent injury or damage to the machine.
2 if the skin pulling machine appears abnormal working sound, it should be stopped immediately to check, to prevent large damage to the machine, injury to the personnel;
3 the machine must be cleaned and maintained at the time of stopping, and make sure that the power supply has been cut off and the warning card is hung;
4.after the work is finished, turn off the machine and cut off the power supply;
5 the operator shall have knowledge of mechanical and electrical operation and be healthy;
6.the operator should be familiar with the structure, performance, safety rules and instructions of the leather-pulling machine, etc.
7 the operator should be trained on-the-job and be on duty with a license.
8 the operation should be checked daily before each class of work.
9.Users must establish the necessary rules and regulations and safety procedures.
repair
Repair, adjust or replace parts immediately if they do not meet the requirements. The following requirements should be achieved in maintenance:
1) the replacement should be the same as the raw material performance during maintenance;
2) maintenance and repair shall not be allowed when the machine is in working condition.
Inspection, maintenance, maintenance and troubleshooting methods:
After each use, the blood on the machine shall be washed with water and the dust shall be washed clean to ensure the appearance of the machine is clean (do not allow water to enter the tank during cleaning) the speed of the drum and the movement speed of the cylinder can be adjusted by a speed regulating valve, self-adjusting according to the actual operation. But do not speed up the roller. Hydraulic oil needs to be replaced once every two years, if water seepage, turbidity phenomenon should be replaced immediately.
Audited Supplier 
){kind=link}