Slaughter Equipment of pig head debristling machine
This machine is a special equipment designed and developed in recent years. It has the characteristics of small volume, simple structure, low price, convenient use and maintenance, high depilation rate, etc. It is suitable for large and medium slaughtering plants.
Structure and usage description:
the drive of the machine is divided into two parts:
1. The main drive part: the main motor passes through the triangle belt, a pair of helical gears, two pairs of sprockets drive two rollers to turn opposite. According to the size of pig head and the condition of shaving, the distance between the two rollers can be adjusted properly.
2. Traction drive: traction motor rotates and moves through triangle belt, deceleration box, chain, angle wheel, pulling block in guide rail, traction pig head support seat.
Installation and test run:
1) layout of pig head plough machine according to process plan and workshop condition, and determine installation position and auxiliary equipment before and after installation.
2) external water spraying pipe
3) check the bearing seat and fastening bolt for loosening;
4) wipe and maintain the equipment in a cycle of one week. Check chain tightness and lubricating parts for lubricating grease.
5) before using the equipment each time, the equipment should run without load for a period of time, and then be put into use after ensuring that the equipment is free from abnormal conditions.
Safety operating essentials
1) it is strictly prohibited to put hands and other things into the machine when the pig head ploughing machine works in order to prevent injury to people or damage to the machine;
2) if abnormal working sound appears in pig head plough machine, it should stop and check immediately to prevent the machine from being damaged and personnel injured;
3) the machine must be cleaned and maintained while stopping, and confirm that the power supply has been cut off and put up a warning board;
4) shut off the machine after work,
5) the operator should have knowledge of mechanical and electrical operation,
6) the operator should be familiar with the structure, performance, safety regulations and this instruction of pig head ploughing machine, etc.
7) operators should be trained and certified to work;
8) daily inspection should be conducted before each shift;
9) users must establish necessary rules and regulations and safety operating rules.
Inspection, maintenance, maintenance and troubleshooting methods
1) lubricate the rotating parts frequently; such as chains, bearings, etc., should be replaced on a weekly basis.
2) after each shaving, the equipment should be cleaned and cleaned to keep the inside and outside of the machine clean;
3) as the machine is in a state of vibration, it is necessary to check whether the connection bolt is loose or not during use.
4) after installation and use of the machine, in addition to normal maintenance, after production in the peak season of each year, a major overhaul should be carried out, and the badly worn parts should be replaced in time to ensure that
5) normal operation of the machine,
6) never exceeding the maximum power and load of the equipment when using the equipment every time, in order to avoid causing damage to the equipment.
7) before using the equipment each time, the equipment should run without load for a period of time, and then put into use after ensuring that the equipment is free from abnormal conditions.
Repair
Repair, adjust or replace parts immediately if they do not meet the requirements. The following shall be done to require that when:
a) repairs the replacement parts should be the same as the raw material performance when the;
b) head ploughing machine is in working condition no maintenance and repair shall be allowed.
Audited Supplier 
){kind=link}