Main use and feature
1), equipment is used for finishing, singling, the final cleaning of carcass surface.
2), equipment characteristic
a. The whole machine adopts mechanical transmission, no pollution to pig body.
b. Stable operation, long service life.
c. Continuous production, high efficiency.
d. Simple operation, less easily damaged parts.
Installation and commissioning:
1) the polishing machine is arranged according to the process diagram and workshop conditions, and the
location of installation and the attached equipment before and after installation are determined.
2) the equipment shall be wiped and maintained in a weekly cycle.
3) before using the equipment each time, the equipment should run without load for a period of time, and then be put into use after ensuring that the equipment is free from abnormal conditions.
Safety operating essentials
1) it is strictly prohibited to put hands and other things into the machine when working to prevent injury to people or damage to the machine;
2) if the machine appears abnormal working sound, it should stop to check immediately to prevent the machine from causing great damage and injury to the personnel;
3) the machine must be cleaned and maintained while stopping, and confirm that the power supply has been cut off and put up a sign;
4) shut off the power supply after work,
5) the operator should have the knowledge of mechanical and electrical operation, and
6) the operator should be familiar with the structure, performance, safety regulations and the instruction of the polishing machine.
7) operators should be trained and certified to work;
8) daily inspection should be conducted before each shift;
9) users must establish necessary rules and regulations and safety operating rules.
Inspection, maintenance, maintenance and troubleshooting
1) frequently lubricate the rotating parts;
2) after each operation, the equipment shall be sorted and cleaned, and the inside and outside of the machine body shall be kept clean; and
3) due to the vibration state of the machine, Use the procedure to check whether the connecting bolts are loose.
repair
The components shall be repaired, adjusted or replaced immediately after the inspection is not in accordance with the requirements. The maintenance shall meet the following requirements:
a) the replacement part shall be the same as that of the raw material during maintenance;
b) when the polishing machine is in the working state, the maintenance and maintenance shall not be allowed.
Audited Supplier 
){kind=link}