380V 0.6-0.8L/Min Automatic Three Point Electric Numb Slaughtering Machine

• Customization: Available
• Application: Pig
• Voltage: 380V
• Model NO.: ZSDH300
• Automation: Automatic
• Condition: New
• Control Voltage: 24V DC
• Air Compressor Exhaust: 0.6-0.8L/Min
• Anaesthetic Voltage: 70-110V
• Mbient Temperature: -10ºC~+40ºC
• Material Quality: Galvanization
• Specification: 7430*1100*1750mm
• Trademark: Jianhua
• Origin: Shangdong Qingdao
• HS Code: 8438500000
• Production Capacity: 2500-3000 Pieces/Day

Product Description

The automatic three-point halo type brain hemp motor

the machine is a special equipment for killing pig hemp electricity, which is optimized and designed on the basis of our company's digestion and absorption of foreign advanced technology.
It is the third generation replacement product of our company's straddle type hemp electric products. Since the product was put on the market,.
It has been identified by relevant departments that its performance indexes are in line with the requirements of the European Union equipment standard 89/392/ewg and relevant national standards.
Its use performance has taken a leading domestic level, and it is currently large in China. First selection equipment of medium pig slaughtering plant.









The main points of safe operation are as follows:

1) the running speed of the conveying mechanism, the running speed of the electric apparatus and the time of the anesthesia are related to the output of the shift. Once adjusted well, it is easy not to move in disorder so as to prevent the bad coordination of the various agencies and affect the quality of the hemp;

2) because of the high voltage of anaesthesia, the operator must avoid contact with the electrode in order to avoid electric shock.

3) this machine is suitable for the 80-140kg live pig automatic anesthesia electricity, the size too small or too big live pig should pay special attention to when the hemp electricity

4) strictly prohibits the machine to work the hand and so on other things into the machine, prevents the injury to the human or the damage machine;

5) if the machine appears abnormal working sound, it should stop to check immediately to prevent the machine from causing great damage and injury to the personnel;

6) the machine must be cleaned and maintained while stopping, and the power supply has been cut off and a warning plate is put up;

7) turn off the machine and cut off the power supply after work;

8) the operator should have the knowledge of mechanical and electrical operation and good health;

9) the operator should be familiar with the structure, performance, safety regulations and this instruction of the machine.

10) operators should be trained and certified to take up posts;

11) daily inspection should be conducted before each shift;

12) users must establish necessary rules and regulations and safety operating rules. 






Inspection, maintenance, maintenance and troubleshooting methods :

Fault phenomenon	Possible cause	Overhaul method
Do not work after turning on the power supply, no indication of work indicator	1. The power supply is not on or in bad contact 2. The circuit breaker in the control box is not closed 3. Fuse damage of controller	1. Connect the power supply, deal with the bad part 2. Close the circuit breaker 3. Find the cause, replace the mental fuse.
No automatic operation	1. The automatic working switch is not on or out of order 2. Sensor lines or not well connected. Sensor adjusting distance is too close	1. Overhaul or replace automatic switch 2. Reconnect line 3 according to wiring diagram. Readjusting the effective distance of the sensor
To keep repeating empty movements	1. Sensor wiring error 2. Manual start button bad	1. Readjust sensor effective range 2. Reconnect line 3 according to wiring diagram. Replace maintenance manual start button
Electric electrodes or electric trolleys can not work	1. The pressure is too low by two. Solenoid valve has no voltage (220v) 3. Mechanical moving parts jammed or rusted to death	1. Adjust the gas pressure 2. Check solenoid valve coil and connection line 3. Repair or replacement of faulty parts
No voltage output during electric shock	1. The hemp switch was not turned on. The electric voltage in the control box is not adjusted 3. Electric shock plate connection line broken	1. Turn on the electric switch 2. Recalibrate the electric voltage of the anesthesia 3. Reconnect the plate circuit
Manual failure to work	1. Manual start button damaged 2. Stop button damaged 3. Damage to control button of electric trolley	1. Replace or maintain start button 2. Replace or repair stop button 3. Replacement or maintenance of car control buttons
Transmission non-rotation	1. The frequency converter is not turned on or the switch is out of order 2. Frequency converter is not set 3. Frequency converter failure	1. Replace switch 2. Reset 3 with reference to Inverter instruction. Replacement of maintenance frequency converter

 

If the above method can not solve the problem, please do not blindly remove, lest the scope of the fault expanded, please contact the technical department of the manufacturer repair.