Pig hair compressed air conveying system
Pig hair compressed air conveying system is a kind of advanced equipment introduced by our company, which consists of cylinder, hopper, pressure tank, pipeline and so on. The system uses compressed air system to transport pig hair to pig hair collection room, which has a very high efficiency; it solves a series of problems such as manual exertion, low efficiency and so on. It is suitable for all slaughterhouses.
the point of operation safety
1) it is strictly prohibited to put hands and other things into the machine while working to prevent injury or damage to the machine.
2) if the machine appears abnormal working sound, it should stop and check immediately to prevent great damage to the machine and injury to the personnel.
3) Clean, repair and maintenance, and hang up a warning board. 4) cut off the power switch after the work is finished.
5) operators should have knowledge of mechanical and electrical operation and healthy health;
6) operators should be familiar with pig hair compressed air conveying system, performance, safety rules and instructions, etc.
7) operators should be trained on-the-job and be on duty with license;
8) check daily before each shift;
9) users must establish the necessary rules and regulations and safe operation rules.
repair
Repair, adjust or replace parts immediately if they do not meet the requirements. The following requirements should be achieved in maintenance:
1) the replacement should be the same as the raw material performance during maintenance;
2) maintenance and repair shall not be allowed when the machine is in working condition.
Inspection, maintenance, maintenance and troubleshooting methods:
The equipment has been tested and tested before leaving the factory, but it may cause maladjustment or failure due to factors such as loading and unloading after leaving the factory. Therefore, a comprehensive inspection of the whole machine must be carried out and installed and used only after it has been determined that all parts of the equipment have been completed.
1) Lubricating the rotating parts frequently, such as chains, bearings, etc., should be replaced with a cycle of one week.
2) after each shift has been used, the equipment should be cleaned to keep the body clean inside and outside;
3) after using for a period of time, the bearings with excessive clearance or damage should be replaced in time to avoid affecting the normal operation of the machinery;
4) wipe and maintain the equipment one week as a cycle. 5) each time before using the equipment, let the equipment run without load for a period of time, and then put it into use after ensuring that the equipment is free of abnormal conditions.
6) Accessories and special tools shall be used in special cabinets, keep clean and prevent abrasion, and may not be borrowed.
7) Power equipment shall not be operated with disease, and any failure shall be eliminated even if it occurs.
8) equipment in daily maintenance, do not disassemble parts, find abnormal should stop immediately. After installation and use, in addition to normal maintenance, regular maintenance should be carried out, wear and tear parts should be replaced in time to ensure the normal operation of the machine.
Audited Supplier 
){kind=link}